Home ITECH | DC Electronic Load IT8500G+ Programmable DC Electronic Load
IT8500G+ Programmable DC Electronic Load - Image 1
ITECH | DC Electronic Load

IT8500G+ Programmable DC Electronic Load

Precision You Can Trust
NABL-Accredited Calibration | Available on Request

The IT8500G+ Programmable DC Electronic Load is a high-precision, multi-functional DC load designed for fast charging device testing, battery discharge, and dynamic testing. With built-in ripple measurement capabilities and 8 fast charging protocols, it is ideal for testing switching power supplies, adapters, and battery-powered devices. Featuring up to 20kHz dynamic mode and high resolution of 0.1mV/0.1mA, it supports up to 16 units in multi-channel mode and offers automatic testing and list functions..

Request Purchase
  • Detail
  • Special Features
  • Specification

The IT8500G+ series is designed for high-speed, high-precision testing, making it suitable for testing a wide range of DC loads such as power supplies, fast charging devices, battery-powered products, and solar energy systems. It offers a wide variety of features like arbitrary waveform generation, ripple measurement, and dynamic load testing. The multi-channel mode is especially useful for users requiring simultaneous testing of multiple DUTs (Devices Under Test) with minimal complexity and reduced cost.

The IT8500G+ series includes 8 fast charging protocols to verify performance across a broad range of charging devices. With its list mode, users can simulate complex current waveforms, and the automatic test function ensures fast and accurate testing of various products. Built-in full protection features such as overvoltage protection (OVP) and overcurrent protection (OCP) guarantee safe operation during tests.

  1. Ripple Measurement:

    • Built-in voltage and current ripple measurement with a 300kHz bandwidth.

  2. Fast Charging Protocols:

    • Supports 8 fast charging protocols, including QC2.0, QC3.0, USB PD, FCP, SCP (only in IT8511G+).

  3. Dynamic Mode:

    • Up to 20kHz dynamic mode for precise control of current rise and fall.

  4. Multi-Channel Mode:

    • Cascade up to 16 devices for reduced burn-in test costs and simpler system integration.

  5. Battery Discharge Test:

    • Provides three cut-off conditions: time, voltage, and capacity.

  6. Measurement Resolution:

    • 0.1mV/0.1mA with high accuracy (±0.025%+0.025%FS for voltage).

  7. Automatic Test Function:

    • Ideal for adapter testing with programmable and automatic testing features.

  8. Current Monitoring:

    • Current waveform monitoring without an expensive current probe.

  9. Protection:

    • Includes OPP/OCP test functions and protections like short-circuit mode.

  • Voltage Range: Up to 600V (model dependent).

  • Current Range: Up to 120A (model dependent).

  • Power Output: Up to 600W (model dependent).

  • Resolution:

    • Voltage: 0.1mV.

    • Current: 0.1mA.

  • Accuracy:

    • Voltage: ±(0.025%+0.025%FS).

    • Current: ±(0.05%+0.05%FS).

  • Dynamic Mode: Up to 20kHz.

  • Sampling Rate: 500kHz for voltage and current.

  • Protection: OVP, OCP, OPP, OTP, current oscillation protection.

  • Interfaces: USB, LAN, RS232, GPIB, CAN (external analog control optional).

  • Operating Modes: CC, CV, CR, CW, CV+CC, CR+CC, CR-LED.

  • List Function: 200 steps maximum for waveform simulation.

  • Multi-channel: Supports cascading up to 16 units.

  • Dimensions:

    • 1U for models with 300W or below.

    • ½ 2U for models with 600W or above.