Attenuator 10 dB 10 GHz 50 Ω SMA (m-f)

The Pico TA262 10 dB 10 GHz 50 Ω SMA attenuator is a fixed RF attenuation accessory designed to reduce signal amplitude by a defined 10 dB while maintaining predictable performance across a wide frequency range.

It is intended for 50 Ω RF and microwave systems and operates from DC to 10 GHz, making it suitable for broadband measurement environments. The SMA male-to-female configuration allows the attenuator to be installed directly between compatible RF instruments, cables, adapters and devices under test.

The TA262 belongs to Pico Technology’s family of fixed 10 GHz attenuators, which also includes 3 dB, 6 dB and 20 dB versions. The TA262 provides the 10 dB attenuation option for applications requiring controlled reduction of RF signal level.

RF Measurement Performance

The TA262 maintains specified attenuation accuracy across its operating range:

• DC to 2 GHz: ±0.2 dB attenuation deviation
• 2 GHz to 5 GHz: ±0.3 dB attenuation deviation
• 5 GHz to 10 GHz: ±0.5 dB attenuation deviation

Its frequency-dependent VSWR specification helps maintain predictable RF performance:

• DC to 2 GHz: VSWR ≤ 1.1
• 2 GHz to 5 GHz: VSWR ≤ 1.25
• 5 GHz to 10 GHz: VSWR ≤ 1.35

These specifications make the TA262 suitable for engineers who require a defined attenuation level across broadband RF measurement setups.

Typical Applications

The Pico TA262 can be used in:

• RF and microwave test benches
• Vector network analyzer measurement setups
• RF signal-level control
• Signal generator test configurations
• Receiver and device testing
• Amplifier and RF component evaluation
• Laboratory signal-conditioning setups
• Research and development testing
• RF prototype validation
• Broadband measurement systems
• Test fixture and cable interconnections

50 Ω RF System Compatibility

The TA262 is designed specifically for 50 Ω systems, the standard impedance used by many RF and microwave instruments, VNAs, signal generators, RF test cables and laboratory accessories.

Using the correct impedance throughout an RF measurement chain helps maintain consistent test conditions and reduces measurement uncertainty caused by impedance discontinuities.

Inline SMA Configuration

The SMA male-to-SMA female configuration allows the TA262 to be inserted directly into compatible RF signal paths without requiring a separate gender-changing adapter in many common test setups.

This makes it useful where a compact fixed attenuator is needed between:

• RF cables
• Test instruments
• Measurement ports
• Devices under test
• RF adapters
• Laboratory test fixtures